Hydraulic traction pultrusion machine
1. The hydraulic pulling glass steel sections pultrusion equipment: Including mold frame, hydraulic station, the tractor and run temperature electronic control box.
2. Pultrusion equipment line also includes the following auxiliary equipment.
1)creel, dipping tank and frame profiles
2) electric cutting machine felt
3)manual lifting resin mixer
4)manually type water spray kowtow profile cutting machine
5)the hydraulic propulsion water spray profile cutting machine; (hydraulic propulsion cut length dimension alarm)
6)the hydraulic propulsion sprinkler profile automatically length cutting system; (hydraulic propulsion cut, Japan's Omron encoder length)
7)hydraulic oil cooling with cooling tower and water tanks, pumps
Typical pultrusion process:
Fiberglass roving & continues mat- Saturate with resin in the resin bath - Preforming system- Pultrusion and curing die- Pulling system- Cut off saw - Products
Pultrusion equipment hydraulic traction Technical parameters:
1. The entire production line layout length 20-30 meters, width 3 meters (about 60-100 square meters). Our company can provide the production line layout.
2. The host part of steel, stainless steel panels, side panels using paint.
3. Traction gantry working size demand processing.
4. Hydraulic station: I used the latest technology: A plurality of sets of pump-pump (forward speed to ensure stable). Hydraulic parts are stacked cramping (easy maintenance), and can be adjusted stepless tension and clamping force. Traction speed with precision throttle, to ensure the stability of traction speed and traction speed stepless adjustment. Hydraulic station with a switch, can achieve hydraulic oil heating cooling, to ensure the normal operation of the hydraulic system.
5. Using the function: A single, manually operated doors and Ssangyong Ssangyong door automatic reciprocating operation function. Automatic intermittent time can be set automatically, and a tension sensor feedback actual production.
6. Three-stage thermal control zone temperature controller, a heating temperature of the mold to achieve automatic control.
Hydraulic reciprocating fiberglass pultrusion equipment
Main specifications and parameters
|Model||Motor power||Heating power||Traction||Speed||Section||Hydraulic pressure||Barometric pressure|
-for large cross section pultruded profiles design, strong traction, smooth and reliable operation
-set debug, two kinds of continuous traction, easy adjustment of the production process
-good dual hydraulic system, the system of anti-interference ability mutual
-cooler with power, easy to achieve 24-hour operation
-main electrical and hydraulic components used internationally renowned brands, high sensitivity, low failure rate
-fault warning function
Hydraulic pultrusion machine working principle and the constituent components:
(1) The working principle of hydraulic pultrusion machine after the fiberglass molding material in the mold is heated, and then by two clamping gantry alternately operating the traction continuously drawn out, to give the desired variety of glass and steel sections.
(2) hydraulic type pultrusion machine consists of mechanical, hydraulic and electrical three parts. Mechanical part by a warming rack, rack, and two clamping gantry composition; Hydraulic part by two mutually independent hydraulic system components, which are by the oil pump, the clamping cylinder, thrust cylinders, integrated valve block, control valve, oil filter valves, oil filters, coolers, and fuel tank and other components; Electrical parts include heaters, thermostats, motors, control boxes.
Hydraulic pultrusion machine classified by tonnage and advantages:
Depending on the traction, hydraulic pultrusion machine is divided into: 12 tons, 16 tons and 20 tons. Choose traction depends on the size of FRP profiles specifications.
Benefits include hydraulic pultrusion machine: Simple and continuous operation, low operating costs, high reliability and productivity.