Low Price High Pressure Polyester GRP FRP Pipe Factory
|FOB Unit Price:||US $250 US $220|
|Purchase Qty. (Meters)||FOB Unit Price|
|Payment Terms:||L/C, T/T, D/P, Western Union, Paypal, Money Gram|
- Model NO.: SWJY-dn600
- Color: Green or as Customers′requirment
- Usage: Environmental Protection, Industral, Household
- Molding Method: Molding
- Fiber Type: GFRP
- Product Name: Low Price High Pressure Polyester GRP FRP Pipe Fac
- Pipe Material: Polyester GRP FRP
- Service Life: More Than 50 Years
- Customized: Available
- Available Diameter Range: 50mm - 4500mm
- Trademark: SWJY
- Specification: accroding to customer′s need
- HS Code: 3901100001
- Surface Treatment: Smooth
- Thickness: 6mm
- Product Categories: FRP Pipe
- Material: Fiberglass
- Type: Polyester FRP
- Feature: High Pressure
- Pipe Type: High Pressure Polyester GRP FRP Pipe
- Temperature: -45~130 ºC
- Length: 3m,6m,12m
- Colour: Green and Customized
- Transport Package: as Your Requirement
- Origin: Hebei
FRP sand inclusion pipes are the result of the scientific research and development and success for many years, is applied to the large liquid transportation projects of new materials, mainly for the buried pipe, tube built on stilts, with light weight, high strength, corrosion resistance, long service life, low operating and maintenance cost, can save a lot of money for construction projects.
Molding process is controlled by computer, mainly in core modules according to the procedures prescribed by the production lining (the same as the filament winding of glass steel pipe lined with craft), according to design good linear and the thickness of the winding structure after gel layer, and quartz sand mixed with resin mortar around structure layer, finally winding outside protective layer.
The main raw materials and auxiliary materials
Resin, surface mat, short cut fiber and continuous glass fiber, quartz sand and other auxiliary materials, etc
.Spigot-and-socket joint with double "O" ring.
1.It is well suited to high-pressures in buried line and enables pressure testing to be carried out with one joint.
2.Double "O" ring joint with nylon rod locked.
It is mainly used in pipeline with strong axial pulling force such as deep well pipe.
It is used for medium and low pressure pipeline and connection of equipment.The flange can be made according to any of HG\JB\GB\DIN\NF\JIS standard.
It is used with high and low pressure pipeline,also for the connection of fittings.Sizes L and T are depended on the working conditions.
5.Spigot-and-socket joint with cementation
Suitable for pipeline under conditions of high pressure and comples loads.
1. High strength, strong ability to resist external load, can be directly buried, used for directly buried under the driveway, no concrete cover, can accelerate the construction progress of cable engineering. Pipe with flexible and is equipped with flexible joint, can resist outside pressure, and pressure of foundation uneven settlement.
2. Corrosion resistance is strong, can resist all kinds of acid, alkali, high soil salinity and water corrosion and erosion of the fluid.
3. No eddy current loss and electric corrosion, good insulation, cable laying and run.
4. Flame retardant, heat resistant performance is good, long-term use of deformation at high temperature. Inner surface is smooth without burr and will not scratch the cable.
5. Design USES socket type connection mode, to adapt to the heat bilges cold shrink. Light weight, a person can carry, two people can be on-site installation operations, can greatly shorten the construction period, reduce the cost of installation.
6. The composite FRP cable protection pipe can avoid road excavation exposure time is long, affects the phenomenon such as urban traffic order.
7. Service life is long, use up to 40 years in underground. Comprehensive performance and cost performance is better than other materials of cable protection tube.
1)Oil or gas transportation lines;
2)Chemical treatment and sewage pipelines;
3)Fluid transportation lines of high, medium and low pressures;
4)Oily water injection lines;
5)Injection lines for tertiary recovery(Injection of polymer, CO2 , NaOH etc.);
6)Tubing for oil producers, tubing for injectors of salty, chemical or oily water, CO2 and polymer
The Production Line
Q: Are you a trading company or a manufacture factory?
A: Our factory is one of the biggest FRP products, FRP machines manufacturer in China
Q: Can your factory customize the machine for clients ?
A: Yes, we can.
Q: What is your payment terms ?
A: Normally,50% as the deposit first by T/T, the rest 50% will be paid before shipping by T/T.
Q: How about after-sales service ?
A: 1 year free warranty, Lifetime technical service support.
Q: How can I install the production line and get a commissioning ?
A: We may send our engineer for installation and commissioning, but relevant cost will be paid by you.
Q:Have you some videos where we can see the line producing?
A: Yes, we can provide some videos
Any enquiry please feel free contact us.